Hi I need the wiring for the Obd2 connector...I have to solder a new one on and was moving a little to quickly and did not write down what colors went where any help would be appreciated...thanks

 

Pin 3 = UBP Bus (violet wire)to EATC(temperature control unit), Driver seat, Body Security Module, and Insturment cluster

4=Ground (Black wire) to Slice 205,S203 to ground point G202(this one has ground from alot of devices are tied to it.

5=Ground (Lite Blue/yellow strip) Data link, to gound point G102 to PCM only

6=Can Bus + (white/light green) sheilded or twisted pair with pin 14 (PCM, instrument Cluster, ABS module.

7=ISO Bus Lite (Blue/white) to Restraints control module and Parking Aid Module

13= Module Programming signal (violet) PCM only

14=Can Bus-(Pink Lite green)paired with pin 6

16= 12v (hot all the time) Lite blue/white Fuse F41

 

Thank you