I recently purchased an '06 f-150 with about 11in of lift and i was wondering if anyone has any ideas for different purchases i should make i have already purchased the edge chip(not installed yet) and thinking about putting Air intake on it but i need some help with other parts i should purchase such as sway bars and what not. thanks for the help. and let me know if any one has a truck like mine so i can ideas.

 

Welcome to the site!

I would recomend you return your Edge and give the folks at Troyer Performance a call. I would get the XcalII, AF1, and some type of performance exhaust, those would help turn those massive tires.

If you haven't replaced the gears I would get a set of 4.88's or higher.

O yea! How about some pics?!

 

Doggone - 11" lift - I definately wanna see pics! ! !

If you're running 38s - I think gears would certainly be in order maybe even into the 5s if they'll fit.

 

Thanks for the help i looked at the troyer parts and i am going to stick with the edge because i want something that i can have in my truck at all times. and where would i find the new gears to look at for the truck and also what is your opinion on the Banks monster exhaust because i know they are BA in deisel but what about gas and also and air Raid cold intake system. let me know Tide cus you seem to know alot about this stuff and i know just a lil. thanks oh and pics are comming i will put up one of my old 01 with 6 inchs though.

 

Banks is a good exhaust. They sell the massive 5" tip which is what I'm considering ordering soon. You can find all of this stuff at www.stylinconcepts.com and www.4wheelparts.com.

With the Banks exhaust you're going to get a loud throaty exhaust which will cause a drone in the cab. What kind of shocks are on your truck Savannah?? The AF1 intake and an exhaust system will get you possbly 1 or 2 mpg's back not everything that the lift took away.

 

stylinconcepts is overpriced IMO.....

 

He covered most of your ?'s

For gears I would look at Yukon and Precision. There are others out there but those are the only ones I know of that are of good quality off the top of my head.

 

I dont know what axle are in there but here is the link to them all-
http://www.precisiongear.com/fordring.htm

I think its the 8.8'' but iam not sure. Cant wait to see the pics!

 

If you want something you can keep attached to the truck then look into the SCT live wire. The edge causes transmission problems and is not custom tuned to your truck like troyer can do with the SCT products.

 

i have a bds lift. and i was also looking at the slp exhaust and the billy boat what are yalls inputs on these to. and also if i do get a cold air intake should i get the induction hood or just keep the money? also i am wondering what i should do about body protection and what kind of sway bars i need to get before my frame shifts or twist from accelerating. and once again thanks for all the help.