Leveled with stock wheels with 285/70/17 tires

 

2 inch?

 

2.5 rough country

 

Did you need a block for the rear end?

 

Mines has the factory block but you can add the rear block and new shocks for extra

 

Here is my truck with a 2.5 level with stock wheels and tires, no rear blocks. Doesn't look very awesome.

And how it looks now with 18's and 35's. Much more awesome

 

Max does the 35s rub at all? I am thinking of doing the 2.5in level kit and using 33s but if the 35s dont rub I may use 35s. BTW truck looks bad ***!!

 

They rubbed a little bit. I just brought my clippers with me to the tire shop and trimmed it right in the parking lot. Only had to take a small corner off the bumper plastic and about a 6 inch square out of the wheel well shroud. No big deal at all, can't even tell, took 5 minutes. I highly recommend it man. Thanks for the compliment too man!

 

Then I shouldn't have any clearance issuses with 35s since I have an aftermarket bumper and have more clearance then a stock bumper there, and you didn't have to trim of the wheel shroud on the inside or the back corner of it right?

 

2.5" Hell Bent. 275/70/17 on 17x9