Okay I got a 04 fx4 it black cloth but it has all the silverish finishings/paint on the plastic example the center console area. The silver paint is rubbing off where the passenger side persons knee would be. Anyone have suggestions on touch up paint or a fix?

 

Plastidip, done my console a year ago and it's holding up great.

 

You go with a darker grey/silver than factory?

 

Here is what you need:

http://www.lmctruck.com/icatalog/fe/full.aspx?Page=87

Most likely it is the Medium Flint if it is the grey paint you need to fix

 

Thank you man exactly what I need.

 

I went with black because I hate the cheap looking silver/gray.

 

Doug How hard was it to get the console off? Id like to do the console, shifter and the chrome ring around the shifter too

 

I only dipped the top panel, it pulls right off without removing anything. Just open the lid and pull straight up. Couldn't be easier!

 

Well do NOT buy the LMC Colorbond Medium flint. It is the same color as your overhead console grey color, not even close to the darker grey that surround our vent panels. I learned the hard way to the tune of $28 for a can of paint I can't return......I only painted the lid to the can to see what it looked like. I bought 42-0781 below.




It matches this:

 

Dark graphite looks like the fx4 interior color to me!?