I have a 05 FX4 and would love to put like a black and red billet badge on the the passenger side on the console, just above the glove compartment, would it be possible to put a few bolts through that piece?

 

I think the airbag comes through the top of the dashboard above the glovebox, but I would make sure that there isnt anything behind the panel you are referring to.

If anything, I would suggest some commercial-grade interior glue (like high-temp silicone).

 

ok, ya I wasn't actually sure how the airbag worked on the passenger side, I gotta peak in there tomorrow if I can.

 

just use some 3m tape, that **** wont budge

 

Oh and also where is the best place to have one made, if I couldnt find anything I know a machinist but the paint scheme id like I wouldnt like to paint myself.

 

I like the other idea better but if worse came to worse, Just not sure how I want them designed as of yet, would lve for them to be outlined in red with a raised edge and in the center to be black but not sure yet, anyone good with photoshop?

 

I wouldnt put anything on the passenger side dash. The air bag deploys from the seam seperating the top of the dash from the part above the glove box. Top flips up towards windshield, bottom down towards your legs, air bag comes straight out. Anything mounted to these surfaces has a probability of coming off at a high rate of speed, higher than that of objects just random in the dash tray.

 

Ya I would do it close the bottom of the peice above the dash and not to big and make sure id secure them so theyd never come off

 

X2 on this.

 

Ya I have it all drawn out now, its 6 1/2 inches long, by 2 1/2 tall. 1/4 wide with 1/8 in dent, it will have a rim around the outside and will look like the new fx4 stickers sort of. ill upload my drawing soon. Having my girlfriends dad machine it for me, just dont know how to add the color, the rim red and the inside black. Any ideas? Be hard to paint but possible with a lot of time, anodizing? slick screen? what would be best