Has Anyone Used These...Any Problems?
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: Washington
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Has Anyone Used These...Any Problems?
So I am looking at getting a set of painted headlights and I wanted to know if anyone had any problems with them? I will probably put a little extra silicon around the outside just to insure they will not leak but I wanted a little more feedback before I pull the trigger.
Thanks for the help.
Here is the link:
http://cgi.ebay.com/ebaymotors/06-08...Q5fAccessories
Thanks for the help.
Here is the link:
http://cgi.ebay.com/ebaymotors/06-08...Q5fAccessories
#3
Devil's advocate
I've heard pretty much all of them are crap and leak and fog up, etc. I'm going to get these: http://www.summitracing.com/parts/HLA-009456801/
Cheaper than genuine HD but good quality.
Cheaper than genuine HD but good quality.
#4
Senior Member
Thread Starter
Join Date: May 2010
Location: Washington
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
I asked myself the same question but I have heard it was such a pain in the to do it yourself (mostly just trying to get the lights apart). I might try to attempt it and then if I mess something up I will buy a set of these.
Just trying to do some howework.
Just trying to do some howework.
#5
Senior Member
Thread Starter
Join Date: May 2010
Location: Washington
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
I've heard pretty much all of them are crap and leak and fog up, etc. I'm going to get these: http://www.summitracing.com/parts/HLA-009456801/
Cheaper than genuine HD but good quality.
Cheaper than genuine HD but good quality.
Those look good. Yeah I have heard the same thing about a lot of the aftermarket lights as well. When you get them let me know how you like them. I might attempt to paint mine myself but as mentioned in my other post it can be a a royal pain.
#6
i have the ones you are looking at on ebay i got them after hitting deer only one fogged up a little i emailed the guy i got them from he said you can return them or he recommended re sealing them im to lazy for that and put a small film of epoxy over the joint no more fog if that helps
#7
Moderator (Ret.)
I've bought sets, painted them, resealed, and sold with good success. The sets bought on Ebay for cheap are more than likely to fog. I've had good success in opening and resealing them too (no fog).
I don't know why the sets fog; must be cheap in the way they seal them.
Pop them in the oven at 250 degrees for no more than 10 minutes. They will pry apart. BE SURE TO GET ALL THE OLD SEALER OUT OF THE CHANNEL!!!! Then head to Home Depot and buy a tube of black silicone and a cheap chauk gun. Apply a good bead (fill the channel) with the silicone, insert the lense, and use some heavy duty rubber bands to hole the lens in place for about 3 to 4 hours. You'll have great results. I've done 3 sets now, with none fogging.
I don't know why the sets fog; must be cheap in the way they seal them.
Pop them in the oven at 250 degrees for no more than 10 minutes. They will pry apart. BE SURE TO GET ALL THE OLD SEALER OUT OF THE CHANNEL!!!! Then head to Home Depot and buy a tube of black silicone and a cheap chauk gun. Apply a good bead (fill the channel) with the silicone, insert the lense, and use some heavy duty rubber bands to hole the lens in place for about 3 to 4 hours. You'll have great results. I've done 3 sets now, with none fogging.
Trending Topics
#8
Senior Member
Thread Starter
Join Date: May 2010
Location: Washington
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Bucko-
Thanks for the tips yeah I think I will try to tackle this as you described and if for some really strange reason I FUBAR I will look at buying an aftermarket set. This is my daily driver so I can't not have working headlights. Thanks for the suggestions guys.
Thanks for the tips yeah I think I will try to tackle this as you described and if for some really strange reason I FUBAR I will look at buying an aftermarket set. This is my daily driver so I can't not have working headlights. Thanks for the suggestions guys.