How mine was.


And now all digital

 

It runs...

Have some codes:
P141
P161
P610

Got a walk aorund video but dropbox has not synced from my phone yet.

Time to do some research.

 

Spoke with speedshop they will adjust the tune for the first 2 on Monday, going to talk with them about where the build is at and such as well since I bought the blower from them as well.

I suck at youtube I guess...
https://www.youtube.com/watch?v=oNsyxMocXSk

https://www.youtube.com/watch?v=it8iHMujoBM

 

On the SCT, I got a DTC p061b which looks like it can be many things.

I notice when I take it around the block that the blower seems noisy(whine) at very light throttle. Per Roush book, this may indicated no vac on SCBP, however, these vac lines have vac. I also quadruple checked the routing.

Waiting for it to warm up outside again and going to check tps, tb, and verify some of the splices I made just in case.

 

Ok, just to update. The tune I got from stage 3 was a total pile...the IMRC was not properly tuned so it would not operate the boost bypass. I got in touch with the guys at JDM and have a tune. They had me do the boost bypass mod so the bypass valve is actuated by vacuum, the more gas you give it, the more boost you get.

So now I am going to do some data logs just to ensure the fuel is on par with what it should be and afr is happy. I still am waiting on a pump from fuel-pumps.net that I should see by the end of May. I am targeting still getting the truck dyno tuned once that arrives, prob in June sometime so, should have dyno sheet then!

 

https://www.youtube.com/watch?v=wPtiUvBDP_U

Vid!

 

Awesome!!!

 

Great job Scott!!!

 

Thanks. Tomorrow going to put the inner fender wells back in, change oil, change fuel filter, and then prob go rod on it.

 

Some more vids.

Another accel: http://youtu.be/r4Duz6a7vuY
Light accel: http://youtu.be/WEFf-zMPI-U
Exhaust #1: http://youtu.be/KutRf0AucSc
Exhaust #2: http://youtu.be/UTfLrVHMAjA