mainman38

I have a 2004 f150 5.4l v8 4wd and have a set of 18'' wheels and what to run toyo m/t 35x12.50 r18 would they fit with a leveling kit and would they fit with the stock 18" wheel? thank you for your help

packers4life869

they will fit with a leveling kit but you may have a tiny bit of rubbing

midwestoffroad

i have them on 18x9 and they rub when turning on the flares.

ryanralston07

hey midwest, how about some pictures of your rig? Like to see the specs on it too as far as wheels/tires. Thanks.

Sorry for the hijack, but with backspacing over 5" you should be able to run 35's as keep a 9" width at max...

midwestoffroad

here a few
18x9 with 5" bs

ryanralston07

What wheels are those and where'd you get them?

Thunderslide

Nice looking truck.

midwestoffroad

they are still available but no longer made there greg weld IMPACT ballistics there a hell of a deal on ebay hes sold out of the 18's but has some 20x9s for 600 shipped and if you ask you can might get the lug nuts (special ones required) thrown in. they will also fit ford and chevy and nissan 6 lug patten (135 and 139) so if you ever decide to sell them... he does have a 18x10 greg weld that has a silightly diffrent pattern called the fugitive

http://cgi.ebay.com/ebaymotors/20X9-...d=p3911.c0.m14

deltaford

i have a 2.5" level kit and my 33x12.50's on the stock rims rub very slightly when turning full tilt to the right. different trucks and different leveling kits produce differing results

ryanralston07

midwest, did you trim any with that wheel/tire setup?