RyanJParish

My shop will do a SI/DO super 40 for 415 bucks. 5 inch tips. it isnt loud and obnoxious and has a clean low rumble. hope this helps.

JpEufracio

I like that brymck.
the tips. Is that the very end of the exhaust?
Might see how much that is for mine.
Went to a shop after I posted this and the guy will put on a magnaflow for 120. Just the muffler

eej711

Yes the tips are the very end of the exhaust system. I recommend a 3" tip at the smallest. They help with the sound.

jerrybizzle

Was that with a tip or just the muffler? I would recommend a 4 inch tip if u keep it a single exit.

cajunboy2208

I have Borla exhaust, with OBX LT header, and Magnaflow Hi-Flow cats. I can post a video of it tomorrow of what it sounds like if you'd like.

eej711

I agree with having a 4" or even a 5" tip if you go with SI/SO. 3" tips with a SI/DO sounds good that's what mine is.

JpEufracio

Love to hear it man

JpEufracio

And Im more than likely gonna get just the magnaflow muffler with the stock piping. So you guys recommend a 3" tip?

eej711

I have just the muffler and stock piping too. The tips matter of what type you get. Are you getting SI/SO or SI/DO?? Also what size muffler are you getting?

scobar

iTrader: (4)

I did a magnaflow muffler on the stock exhaust system. The cost was about $80 for the muffler and about 1-2 hours to drop, swap and weld this in.

This is a 24" magnaflow, I somewhat wish I would have gone with a shorter one, but the sound is nice, its mellow, at idle its hardly noticeable and at highway speeds you can hear it a little bit. Not sure how much louder it will get after break-in, but it sounds good IMO.