Driver seat won't move

Reply Subscribe

Thread Tools

Search this Thread

01-10-2016, 07:22 PM

#11

Ricky Fierro

Junior Member

Join Date: Jan 2016

Posts: 1

Likes: 0

Received 0 Likes on 0 Posts

f150 king ranch

Quote:

Originally Posted by s_vares

Ahh easy fix, they all do it. Mine did,
There is a connection behind the plasic that covers the wires where they lead to the fise box...

here, found the link! I help this guy too

https://www.f150forum.com/f4/driver-...-150-a-131102/

I just fixed mine but was wondering were was all the water coming from that I seen

Reply Like

01-10-2016, 09:31 PM

#12

SoCarFordMechanic

Member

Join Date: Jan 2016

Location: South Carolina

Posts: 37

Likes: 0

Received 1 Like on 1 Post

Quote:

Originally Posted by Ricky Fierro

I just fixed mine but was wondering were was all the water coming from that I seen

do you have a sun roof? If the drains are clogged it could be overflowing and running down behind the a pillar and into the floor and kick panel

Reply Like

01-11-2016, 05:14 AM

#13

Mod (Ret.)

Moderator (Ret.)

Join Date: Sep 2008

Location: Lake Mary Florida

Posts: 9,460

Likes: 8

Received 475 Likes on 375 Posts

Quote:

Originally Posted by Ricky Fierro

I just fixed mine but was wondering were was all the water coming from that I seen

Water in the channels and floor area are unfortunately common for the 04 to 08 trucks. Search this forum for "water leaks" to identify the common source areas for the leaks.

Reply Like

09-26-2016, 06:22 PM

#14

sne43

Junior Member

Join Date: Sep 2016

Posts: 3

Likes: 0

Received 0 Likes on 0 Posts

BUMP

I found this thread after losing my power front drivers side seat adjustment and pedal adjustment on my '04 F150 Lariat. Cut out the splice below the fuse box with the orange and green wire and used a new piece of wire and butt splices to replace. Still nothing. All fuses are fine.

There is no up, down, forward or back and no sound. What's next to look at and how do I do it.

Reply Like

10-23-2023, 08:02 PM

#15

Nolan Beckner

Junior Member

Join Date: Apr 2020

Posts: 4

Likes: 1

Received 0 Likes on 0 Posts

Quote:

Originally Posted by dhodges45

Thanks for the help. I found the wire for the mirrors and re-spliced it. It was completely broken in two. On the seat though I am still at a stand still. I replaced the switch a while back and it still didn't work right. I'm sure you know there is a restocking fee for the dealers so it didn't bother taking it back. It did work intermittently but now it does nothing but make a clicking noise in a module under the seat. I'm not sure if changing that would fix it or not and I'm not sure how to test it. Also its a MFer to get too... Any advice on that would be appreciated.

Thanks

Hey! Did you ever figure your issue out? I am trouble shooting the exact same issue now. Same thing I can hear a click when the switch is used but nothing happens. Haven't metered anything yet just researching. In the same sequence I fixed the broken splice behind the body control module, then the mirrors worked and I have 12v at the seat but didn't check the specific pins mentioned. It seemed like more than one on the master plug to the seat had voltage. Anyways, mirrors work, pedals and driver seat are not. Also, I know the motors are fine because the worked with 12v directly to them to move the seat out from overtop of they bolts holding them in.

Last edited by Nolan Beckner; 10-23-2023 at 08:10 PM.

Reply Like

Reply Subscribe