I have a 2004 F150 Lariat and i'm getting ready to order a Borla Exhaust from JEGS. The problem is that i'm not sure which one i'm supposed to order because they both say 2004.
Would it be this one?
http://www.jegs.com/i/Borla/157/140087/10002/-1
Or this one?
http://www.jegs.com/i/Borla/157/140137/10002/-1

 

good question. i just put on the 3.5 mbrp and i really like it

 

im going to guess that the first one http://www.jegs.com/i/Borla/157/140087/10002/-1 is for the heritage model since it was also made in 04.

and this one is for the 04 "new style" http://www.jegs.com/i/Borla/157/140137/10002/-1 due to the fact it lists the 04-07 and not just 04

 

Dude are you crazy??? $850 for an exhaust. Go to a custom exhaust shop and they can do anything you want, any muffler, set up, tips, exit area, whatever for under $500 and it's all welded and hangs perfectly. A lot of bolt on never sit or hang perfect for my tastes.

 

No I wasn't planning on paying that much for an exhaust system. I found the 140087 for around $350 and was going to have them price match it, but since it is most likely for the heritage model, i'm going to have to find an alternative now.

 

This is where I got my system. If you're going to put your own on its really cheap. I got my total system for under $200. Since putting duals on these trucks basically has no effect on mileage or power I went with the NON-Mandrel bends. System sounds awesome after you break the muffler in just a bit. some drone at highway cruising speeds but not bad at all and my friend with a $500 muffler shop build has the same drone with the best of everything. after winter is over im going to take it into a place to have it welded up as i dont like welding on my back.

http://stores.ebay.com/mad-hatter-professional-exhaust