Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Bilstein 5100's??

Thread Tools
 
Search this Thread
 
Old Apr 7, 2013 | 01:06 PM
  #1  
f150-06's Avatar
Thread Starter
Member
 
Joined: Mar 2012
Posts: 31
Likes: 2
Default Bilstein 5100's??

Currently have a tuff country 2.5 inch leveling kit on my 2006 f150 4x4 XLT, just ordered the bilstein 5100 adjustables. Thinking about removing the tuff country kit and just using the 5100's for my level. Will I regret this? While I'm sure it will ride better, will the front be lower? Pics would help!! Thanks
Reply
Old Apr 7, 2013 | 08:22 PM
  #2  
2nd150's Avatar
.....
10 Year Member
 
Joined: Apr 2011
Posts: 631
Likes: 47
From: Bucks County Pa.
Default

The Bilsteins will sit lower about 1/2", at least mine does, but I like it better.I did have a 2.5"CCM level took that off and put on Bilsteins. I think the ride is about the same.


LEVEL KIT---Bilstein 5100's??-sdc11054.jpg



Shocks--Bilstein 5100's??-sdc11079.jpg
Reply
Old Apr 7, 2013 | 08:29 PM
  #3  
riverryder's Avatar
Member
 
Joined: Apr 2013
Posts: 60
Likes: 9
From: Virginia
Default

From all that I have read here and other places you can't go wrong with the Bilsteins. My fronts are being installed on Tuesday and I am doing the rears myself tomorrow. I am psyched.
Reply
Old Apr 7, 2013 | 08:40 PM
  #4  
f150-06's Avatar
Thread Starter
Member
 
Joined: Mar 2012
Posts: 31
Likes: 2
Default

Originally Posted by 2nd150
The Bilsteins will sit lower about 1/2", at least mine does, but I like it better.I did have a 2.5"CCM level took that off and put on Bilsteins. I think the ride is about the same.

LEVEL KIT---

Shocks--
Thanks man, sweet truck BTW. I figured that it would lose a little height, even with my level kit the front sits about an inch lower right now, I guess I will found out in about a week and a half! Gonna try it myself
Reply
Old Apr 7, 2013 | 08:41 PM
  #5  
f150-06's Avatar
Thread Starter
Member
 
Joined: Mar 2012
Posts: 31
Likes: 2
Default

Originally Posted by riverryder
From all that I have read here and other places you can't go wrong with the Bilsteins. My fronts are being installed on Tuesday and I am doing the rears myself tomorrow. I am psyched.
Yeah that's why I am goin with them, lot of good reviews! Post a pic on here when you can!
Reply
Old Apr 8, 2013 | 12:17 PM
  #6  
riverryder's Avatar
Member
 
Joined: Apr 2013
Posts: 60
Likes: 9
From: Virginia
Default

Will do, I just joined up so I need to get a pic of my truck on here anyway. Hopefully this week. Busier than a two legged dog trying to chase rabbits right now.
Reply
Old Apr 8, 2013 | 12:21 PM
  #7  
HoustonRider's Avatar
0.9% is for suckers!
 
Joined: Sep 2012
Posts: 1,529
Likes: 172
From: Texas
Default

I just installed 5100s all the way around. Fronts are set 2nd from top (1.5") I think.

Before:



After:



Reply
Old Apr 8, 2013 | 12:31 PM
  #8  
f150-06's Avatar
Thread Starter
Member
 
Joined: Mar 2012
Posts: 31
Likes: 2
Default

Originally Posted by HoustonRider
I just installed 5100s all the way around. Fronts are set 2nd from top (1.5") I think.

Before:

After:
Sweet truck! Thanks
Reply
Old Apr 20, 2013 | 04:52 PM
  #9  
f150-06's Avatar
Thread Starter
Member
 
Joined: Mar 2012
Posts: 31
Likes: 2
Default

So I installed the 5100's today, took out the leveling kit found out it was 1.5 inches not 2.5 so I went with the highest setting, 2 inches and didn't lose any height and the ride difference is unbelievable!! Rides like new! Solid and grounded. Fronts were shot from the leveling kit, I could pull them out and the would literally fall back in! It was a pretty tough job, I rented strut compressors, two sets and used four on each spring, two would NOT have been enough! Thanks for the photos ALL and the bilsteins are definitely the way to go leveling your rig!
Reply
Old Apr 20, 2013 | 07:04 PM
  #10  
ymeski56's Avatar
Senior Member
Supporting Member

 
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Default

Moved to 03'-08' section.
Reply



All times are GMT -4. The time now is 07:34 AM.