Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Battery Dead, Keys Won't Work

Thread Tools
 
Search this Thread
 
Old Oct 15, 2010 | 02:15 PM
  #1  
Scarblah's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2010
Posts: 5
Likes: 0
Default Battery Dead, Keys Won't Work - How do I Charge?

So I am selling my friend's 2004 SuperCrew FX4 because he left for the Peace Corps last month and will be gone for the next 27 months.

I jumped it off (battery dead from his mom not touching it for a month) and drove it 40 minutes home. After 5 minutes of being off, I started it again to make sure the battery had a charge and then went to bed. This morning it was dead, the keyless entry didn't work, and the ignition key doesn't work in the only door with a keyhole.

I'm thinking I need to charge the battery somehow without popping the hood (unless you know how I can easily pop it from the outside) and assume I can find the starter and ground the other cable to the frame to charge it. Will that work?

If so, can anyone tell me what to look for or post a picture from the underside of the truck of how I can find the starter?

I really appreciate and would like to say that this forum seems pretty legit.

Thanks,

Scarblah

Last edited by Scarblah; Oct 15, 2010 at 03:54 PM.
Reply
Old Oct 15, 2010 | 02:52 PM
  #2  
jkurtz04's Avatar
Senior Member
 
Joined: Nov 2009
Posts: 313
Likes: 8
From: dirty ga
Default

i would love to know this answer. my keyhole got drilled out in an attempt for someone to break in, so ive always wondered this. ive actually just made sure my battery is always charged and running strong cause im clueless of what to do if it died.
Reply
Old Oct 15, 2010 | 04:11 PM
  #3  
Scarblah's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2010
Posts: 5
Likes: 0
Default

That sucks. You'd think the ignition key would work in the door. Any reasons this wouldn't be the case?
Reply
Old Oct 15, 2010 | 04:20 PM
  #4  
Turkey Hunter's Avatar
Senior Member
 
Joined: Jan 2010
Posts: 1,559
Likes: 2
From: virginia
Default

I may be wrong but if you put juice to the starter wouldn't the starter start turning? It wouldn't start without the key tho. I may be wrong tgo. I'm interested to find out the answr to this.
Reply
Old Oct 15, 2010 | 05:05 PM
  #5  
Scarblah's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2010
Posts: 5
Likes: 0
Default

So where should I connect to the starter?
Reply
Old Oct 15, 2010 | 05:45 PM
  #6  
GATORB8's Avatar
Senior Member
15 Year Member
Photogenic
Photoriffic
 
Joined: Dec 2009
Posts: 5,001
Likes: 154
From: Arlington Heights, IL
Default

4 gauge red cable goes straight back to the battery +. Hopefully right after you connect, you'll be able to use the keyless to open.
Reply
Old Oct 15, 2010 | 05:46 PM
  #7  
GATORB8's Avatar
Senior Member
15 Year Member
Photogenic
Photoriffic
 
Joined: Dec 2009
Posts: 5,001
Likes: 154
From: Arlington Heights, IL
Default

Originally Posted by Turkey Hunter
I may be wrong but if you put juice to the starter wouldn't the starter start turning? It wouldn't start without the key tho. I may be wrong tgo. I'm interested to find out the answr to this.
No, the starter solenoid is inside the starter on our trucks.
Reply
Old Oct 15, 2010 | 05:58 PM
  #8  
Scarblah's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2010
Posts: 5
Likes: 0
Default

Originally Posted by GATORB8
4 gauge red cable goes straight back to the battery +. Hopefully right after you connect, you'll be able to use the keyless to open.

Thanks for the info Gator...Which side of the bay is it on? Will i need to access from underneath or through a wheel well? I am still at work but will give it a go when I get home.

Thanks again,

Scarblah
Reply
Old Oct 15, 2010 | 06:07 PM
  #9  
GATORB8's Avatar
Senior Member
15 Year Member
Photogenic
Photoriffic
 
Joined: Dec 2009
Posts: 5,001
Likes: 154
From: Arlington Heights, IL
Default

This give you an idea?
Attached Images  
Reply
Old Oct 15, 2010 | 09:28 PM
  #10  
HiOffcr's Avatar
Senior Member
 
Joined: Nov 2009
Posts: 264
Likes: 0
From: Killeen, Tx via Ft. Bragg, NC via Columbus, Ohio
Default

IOT sell the truck, he should have given you a power of attorney in order to do so. You should be able to take that to the dealer with the title or registration. With that, they should be able to cut you a key to work in the door. Sorry, but I am just not comfortable telling you how to hotwire a starter on the internet, especially since you just joined.
Reply



All times are GMT -4. The time now is 04:26 AM.