ANZO U-Bar Headlights Problem - Relay Buzzing
Thread Starter
Junior Member
Joined: Mar 2017
Posts: 1
Likes: 0
ANZO U-Bar Headlights Problem - Relay Buzzing
Background:
I installed ANZO U-Bar headlights approx one year ago and they worked great for about 11 months (see attachment). Last week the Hi Beams would not turn until after about 10 minutes of driving. Now the Headlights will not turn on at all.
Problem description:
-Hi Beams and Low beams will not turn on
-LED Ubars and Marker lamps are on
-Loud Buzzing coming from the engine compartment relay box (relay-R03)
-Hi Beam symbol on Dash is stuck on no matter what the position of the hi beam selector is.
-I am assuming my bulbs are all OK because they were on and off intermittently at first and now all 4 are off at once.
I have tried:
Replacing the Engine compartment Headlamp relay (R03)
Replacing the Fuse panel Headlamp Relay (R03)
Replacing the headlight Fuses
Disconnecting battery for 30 mins
I have heard the Hi beam selector/turn signal switch can fail so that is what I plan to replace next. Wondering if anyone has suggestions before I replace or take to a shop.
Thanks!
I installed ANZO U-Bar headlights approx one year ago and they worked great for about 11 months (see attachment). Last week the Hi Beams would not turn until after about 10 minutes of driving. Now the Headlights will not turn on at all.
Problem description:
-Hi Beams and Low beams will not turn on
-LED Ubars and Marker lamps are on
-Loud Buzzing coming from the engine compartment relay box (relay-R03)
-Hi Beam symbol on Dash is stuck on no matter what the position of the hi beam selector is.
-I am assuming my bulbs are all OK because they were on and off intermittently at first and now all 4 are off at once.
I have tried:
Replacing the Engine compartment Headlamp relay (R03)
Replacing the Fuse panel Headlamp Relay (R03)
Replacing the headlight Fuses
Disconnecting battery for 30 mins
I have heard the Hi beam selector/turn signal switch can fail so that is what I plan to replace next. Wondering if anyone has suggestions before I replace or take to a shop.
Thanks!
