Hi I have a 2008 F150 and my abs light is on, I ran the codes and got b1296: replace the LF abs sensor and B1596: Repair Continuous Codes. I replaced the entire hub assembly and the abs sensor cleared the codes and I can't seem to get rid of the B1596: Repair Continuous Codes code. Can anyone help? Thanks.

 

is the ABS light gone ??

 

Thank you for responding. Yes the ABS light is still on.

 

Dis-connect the Batt for 15 mins and re-connect...

 

Thank you for responding. I tried disconnecting the battery for 30 minutes and the light is still on. Any other thoughts?

 

I beleive B1596: Repair Continuous Codes code is when the ABS system tries to complete its self test of the system...do not know why it's not in your case.. the 1296 code is gone now that you replaced the sensor..correct ?

 

Yes the 1296 code is gone. That is what is confusing me the B1596 is the only code that remains. Thanks

 

I just wanted to post that I have solved this problem. There was a short in the ABS wiring. Thank you everyone for your comments.

 

How did you fix this problem? Mine is doing the same exact thing. Tried everything

 

Hey varmint killer where did you find the short in the wiring to fix the problem with the abs light? I have fixed one broken wire on the rear sensor and checked all the wires going back to the abs module and not found anything yet, i'm sure they have a common place for things like this to happen, mine was just a few feet from the rear sensor, but that only fixed one problem now I could use a little help finding the other one. any help would be greatly appreciated. thanks