08 5.4: Resistance testing
Thread Starter
Member
Joined: Mar 2025
Posts: 35
Likes: 1
08 5.4: Resistance testing
I checked the wires going to the transmission range sensor from the PCM, and here's what I got, in ohms.
TR1: 2.0
TR2: 1.2
TR3A: 1.5
TR4: 2.3
Are these good readings?
If so, what should I check next?
I'm having an issue where I only get the "Trans Fault" message in reverse, and the shift is harder than normal. Otherwise if I go to drive from park, once I hit 30mph, it'll act like it's in neutral. I've had P0705 and P1702 codes.
TR1: 2.0
TR2: 1.2
TR3A: 1.5
TR4: 2.3
Are these good readings?
If so, what should I check next?
I'm having an issue where I only get the "Trans Fault" message in reverse, and the shift is harder than normal. Otherwise if I go to drive from park, once I hit 30mph, it'll act like it's in neutral. I've had P0705 and P1702 codes.