What Tire size???
#1
Senior Member
Thread Starter
What Tire size???
Ok so i just got a set of pro comp after market rims 18x9 with 0 offset. I have a 2.5" ready lift in my 2012 4x4 XTR i planned on getting 35x12.5x18 pro comp xtreme a/t tire but im thinking now should i go a little smaller on the tires. I know ill have trimming to do just seeing what you guys think would be best option.
#2
Senior Member
You may want to consider returning those wheels. 0 offset moves the tire/wheel center-line out about an inch and a half from the stock offset of +40 or +44mm (don't remember). Add to that tires that are over an inch wider than stock will make the tire stick out an additional half inch or so. You're looking at your outer tire edge moving out at least two inches, which will make more interference problems as the tire will move forward and back more while turning. Something in the +20mm offset range would work best. If you want a narrow 35", I know Toyo makes a 285/75r18 which is about 11.5" wide.
#3
Senior Member
Thread Starter
You may want to consider returning those wheels. 0 offset moves the tire/wheel center-line out about an inch and a half from the stock offset of +40 or +44mm (don't remember). Add to that tires that are over an inch wider than stock will make the tire stick out an additional half inch or so. You're looking at your outer tire edge moving out at least two inches, which will make more interference problems as the tire will move forward and back more while turning. Something in the +20mm offset range would work best. If you want a narrow 35", I know Toyo makes a 285/75r18 which is about 11.5" wide.