Want Fogs to match HIDs...
#131
2013 FX4 SuperCrew
iTrader: (1)
A little brighter but not by much. The bulbs have a blue tinting to the glass and I imagine this is what prevents them from looking like the warm output of the oem bulbs. Still, better than the factory bulb and all I wanted was for them to match the same color spectrum of the HID's. That, they achieve.
#133
Boost :)
I finally got around to installing mine and found the same issue with the red O-ring. However, I was able to make them fit and work without any major issue using the one that they provided. It took a little extra effort, but they fit.
And to Andrade, the box came from here in U.S. and they use a 3rd party company to process all of their payments. I believe 2 checkout is the name. I didn't have any issue with using my card with them.
And to Andrade, the box came from here in U.S. and they use a 3rd party company to process all of their payments. I believe 2 checkout is the name. I didn't have any issue with using my card with them.
The following users liked this post:
Andrade (01-13-2015)
#134
Senior Member
iTrader: (3)
Those blue tinted Hoens are probably a bit dimmer than a SilverStar or PIAA 9145. They are whiter but thats due to the extra helping of blue tint, which is why they're good for an HID color match and useless for everything else.
The yellow Hoen "endurance" is the one to get for functionality
The yellow Hoen "endurance" is the one to get for functionality
Last edited by johndog82; 01-13-2015 at 12:48 PM.
#135
14 King Ranch Black
Just installed mine. <5 minute project. Also, was able to use the seal that came on the new bulbs without an issue.
Pic with new bulb on passenger side:
Both sides installed:
Pic with new bulb on passenger side:
Both sides installed:
#137
14 King Ranch Black
#138
Senior Member
iTrader: (1)
The few output shots I've seen look good. Beam pattern is roughly 50* wide. I want to illuminate a bit more of the road's edge, so I'll mount mine in the fog buckets with a 10* or so turn outwards. Should be rather impressive.
The only thing I don't like is the square peg in the round hole.
The only thing I don't like is the square peg in the round hole.
#140
14 King Ranch Black
The few output shots I've seen look good. Beam pattern is roughly 50* wide. I want to illuminate a bit more of the road's edge, so I'll mount mine in the fog buckets with a 10* or so turn outwards. Should be rather impressive.
The only thing I don't like is the square peg in the round hole.
The only thing I don't like is the square peg in the round hole.
Hard to say, sometimes the yellow bulbs seem to reflect light more.