URGENT! What line do I tap into for snow perf Meth kit
#3
Born Texan
Thread Starter
Join Date: Jul 2015
Location: Richmond TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Sorry sent it in a rush...
I have the spacer but it only has a port for the injection nozzle. I need to connect the controller to a boost reference line but I'm not sure which line it is... I think its the 4" long hose with a green stripe just above the hard plastic line that goes from the valve cover to the intake on the bottom of the picture.
I have the spacer but it only has a port for the injection nozzle. I need to connect the controller to a boost reference line but I'm not sure which line it is... I think its the 4" long hose with a green stripe just above the hard plastic line that goes from the valve cover to the intake on the bottom of the picture.
#5
Born Texan
Thread Starter
Join Date: Jul 2015
Location: Richmond TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
OK, so I've seen people do it at 3 but they mention a flutter on a boost gauge. LET told me to use 2 but I haven't seen anybody use this spot... You are using 1 for Meth?
I would assume the controller only need boost and not vacuum so I would guess 3 would not be the best...
I would assume the controller only need boost and not vacuum so I would guess 3 would not be the best...
#6
Use this thread. I've closed your other threads
The following users liked this post:
sigma pi (07-22-2015)