Tire Fitment question- 1000th edition.
#1
Senior Member
Thread Starter
Tire Fitment question- 1000th edition.
Probably been asked a thousand times, but i'm on my phone and the search function shows 0 results (won't load properly) when i know there's a ton of answers... I apologize. Anyway, Do OEM raptor wheels/tires (315/70/17) fit on a '13 FX4 Screw without ANY lift/level, without rubbing? Doesn't matter if it rubs at full compression, the truck is too big to be any good off road anyway.
Thanks.
Thanks.
#2
Senior Member
Probably been asked a thousand times, but i'm on my phone and the search function shows 0 results (won't load properly) when i know there's a ton of answers... I apologize. Anyway, Do OEM raptor wheels/tires (315/70/17) fit on a '13 FX4 Screw without ANY lift/level, without rubbing? Doesn't matter if it rubs at full compression, the truck is too big to be any good off road anyway.
Thanks.
Thanks.
#3
Senior Member
Thread Starter
Damn. Not looking to level it right now. Oh well.
#4
Senior Member
Thread Starter
A bit confused... Got search working and was doing more research and some people say they fit as long as you trim the valence?
#5
Senior Member
They may be close to clearing on the 09 and up wheelwells...on my '04 I definitely had to level. A little smaller diameter tire like a 285x75 or a 295x70 may clear at stock height. My '11 cleared 305x55x20's (33.2x12.6) at stock height even though I later leveled the truck.
#6
Senior Member
Thread Starter
It's a 2013, so i'm only worried about clearing in the 09+'s, does anybody actually run 34" tires without a lift/level?
Last edited by McCarthy; 11-19-2013 at 01:46 AM.
#7
Senior Member
Thread Starter
Been doing a ton of research, i will have to find a set of raptor wheels only and buy a set of 33"s. Damnit.