Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

Shock removal help.

Thread Tools
 
Search this Thread
 
Old Mar 8, 2015 | 07:10 PM
  #1  
tu3712's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2013
Posts: 155
Likes: 13
From: Oklahoma
Default Shock removal help.

I'm putting on me fox coil overs and currently have a level kit on. I can't get the lca low enough to get the shock out. Any advice?

JC
Reply
Old Mar 8, 2015 | 07:32 PM
  #2  
Steve Osborne's Avatar
Senior Member
10 Year Member
 
Joined: Mar 2013
Posts: 2,369
Likes: 369
From: corbeil ontario canada
Default

maybe a bottle jack... I did on my 2in level kit...
pic's here..https://www.f150forum.com/f38/got-leveled-257509/
Reply
Old Mar 8, 2015 | 07:40 PM
  #3  
alpinestar1123's Avatar
Senior Member
10 Year Member
 
Joined: Nov 2011
Posts: 1,184
Likes: 152
From: Burbank CA
Default

Originally Posted by tu3712
I'm putting on me fox coil overs and currently have a level kit on. I can't get the lca low enough to get the shock out. Any advice?

JC
Make sure you disconnect the sway bar it's a pain but use a pry bar make sure you leave the nuts on the old strut at the top


Last edited by alpinestar1123; Mar 8, 2015 at 07:45 PM.
Reply
Old Mar 8, 2015 | 07:43 PM
  #4  
alpinestar1123's Avatar
Senior Member
10 Year Member
 
Joined: Nov 2011
Posts: 1,184
Likes: 152
From: Burbank CA
Default

Once I did the first one the second one was a breeze the hard part is getting the new one in haha good luck let's us know

Last edited by alpinestar1123; Mar 8, 2015 at 07:45 PM.
Reply
Old Mar 8, 2015 | 09:40 PM
  #5  
tu3712's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2013
Posts: 155
Likes: 13
From: Oklahoma
Default

Finally got it. Thanks for the help. Torsion bar was the key. First one took 3 hrs 2nd 30 minutes.

JC.
Reply
Old Mar 9, 2015 | 02:34 AM
  #6  
alpinestar1123's Avatar
Senior Member
10 Year Member
 
Joined: Nov 2011
Posts: 1,184
Likes: 152
From: Burbank CA
Default

Originally Posted by tu3712
Finally got it. Thanks for the help. Torsion bar was the key. First one took 3 hrs 2nd 30 minutes.

JC.
Hell yea
Reply
Old Mar 11, 2015 | 01:22 AM
  #7  
STingray1300's Avatar
Senior Member
 
Joined: Oct 2012
Posts: 2,462
Likes: 717
From: SF Bay Area
Default

Torsion bar? Maybe you're thinking about the bushings' resistance to flexing perhaps?
Reply
Old Mar 11, 2015 | 09:21 AM
  #8  
tu3712's Avatar
Thread Starter
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2013
Posts: 155
Likes: 13
From: Oklahoma
Default

Originally Posted by STingray1300
Torsion bar? Maybe you're thinking about the bushings' resistance to flexing perhaps?
Sway bar
Reply




All times are GMT -4. The time now is 01:37 AM.