rkfvd3

Hello, I have the remote start and alarm system on my 2010 platinum and I've been having issues lately. When I remote start the truck, it will run for about 3 seconds and then shut off and the horn honks as if the alarm was triggered. When I hit unlock the horn honks 3 times, but there are no open doors. Does anyone have any idea how to fix this? Or is it worth a trip to the dealer? I have the premium warranty but Im not sure if this is covered

raz59

Factory alarm? Then yes head to the dealer. IMO alarm systems in vehicles are useless. People for the most part ignore them. If you can have it reversed and just instal a starter it keeps things simpler. I have had alarm systems in two vehicles when I was younger and they were more headache then they were worth. Good luck!

rkfvd3

Its the factory remote start and alarm. Do you think that will be covered?

Tvanpool

All electronics are covered under the 3 - 36 warranty unless they are physically damaged or modified.

FFEMTPSTX

i had an issue with mine and another member here helped me out and basically it came to all i did is unhook the battery for a fem minutes to let the modules reset and it all worked as new......i figure its an easy attempt to see what happens and worse case you may loose radio presets

raz59

As previous post stated, it should be as long as not modified. Worse case scenario is they remove the product if they can not fix it.

rkfvd3

Thanks for the input guys. I'll try that this weekend and if that doesn't work I'll take it in. I do have almost 80,000 in under 3 years so if it might be covered it would be under my extended warranty.