Gravelley

So my 18" Pro Comp Helldorados came in yesterday, Getting Pro Comp Xtreme A/T 35x12.5x18 on them once winter is done here. What you guys think good combo 2.5" ready lift in truck already.

XLTinSD

I like those a lot. Going to be a nice setup. What offset are they?

Gravelley

0 offset guys at the store said that's the best option for little rub and not sticking 4" out past the fender.

sincityrebel

I just put the 18" Helldorado's on my truck this week. Got 33 trail grapplers on em. I have a 3" level. Didn't want to risk the rub going with bigger tires but they LOOK great.

QCFX2

Wrong generation

MikeyZ

0 offset on 35x12.5---- that's going to be a TIGHT fit if I'm thinking correctly. Probably need some trimming.
The stock wheels are +44 offset. 0 will stick out a good amount

Gravelley

Well from my research and long discussions with the shop i bought all the parts and labor from said with a 4x4 F150 2.5" level with a low offset or near 0 would fit 35x12.5x18 with little or no rubbing or trim issues. Also they said they will not stick out far with a 0 offset. They are a nation wide dealer so i trust what they say and have seen lots of great truck they do. So i think im fine.

1BD9D7

A 35" would fit with +44 offset. There is a lot of difference in +44 and +0 offset, I believe 33" tires would clear w/o trimming, but certainly 35" will need something, either way they will look great once it's done.

Gravelley

Oh i know there will be trimming don't really care if its plastic, i already have the lower valence off which from what they say usually causes the most trimming. Just don't want them to stick out so far that i have to get flares so it don't look stupid with half the wheel outside the truck.

MikeyZ

Hope this "nationwide dealer" knows what they are talking about. Look at any truck with a 0 offset and a 12.5 tire and see how far it sticks out. Whatever you say!!!

Tip: use the wheel and tire thread to find what you actually want. Those are not going to fit.