Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

Power locks not working

Thread Tools
 
Search this Thread
 
Old Jul 30, 2020 | 11:04 PM
  #1  
Osbornepe's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2020
Posts: 4
Likes: 0
Default Power locks not working

The controls inside to unlock and lock the doors do not work nor does the key fob lock on lock the doors The Door locks make no noise but if lock with a key fob you open the door the alarm will go off any help would be greatly appreciated
Reply
Old Jul 31, 2020 | 10:34 AM
  #2  
Spiky's Avatar
Senior Member
Supporting Member

10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2015
Posts: 10,934
Likes: 2,457
From: Minneapolis
Default

The alarm is normal when you physically turn the key in the lock. If you start the truck immediately, should be no alarm. I mean, assuming you have a 12th gen F150.

There could be a few different things wrong that block your fob from working. Do the controls on the passenger door work?
Reply
Old Jul 31, 2020 | 11:35 AM
  #3  
Osbornepe's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2020
Posts: 4
Likes: 0
Default Model

Sorry my truck is a 2011 and none of the locks work not by key fob or my the lock switches on driver or passenger door
Reply
Old Jul 31, 2020 | 12:51 PM
  #4  
Spiky's Avatar
Senior Member
Supporting Member

10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2015
Posts: 10,934
Likes: 2,457
From: Minneapolis
Default

Have you checked fuse 20 inside?
Reply
Old Jul 31, 2020 | 04:36 PM
  #5  
Osbornepe's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2020
Posts: 4
Likes: 0
Default

I have not I don’t know which fuse location not listed as power door locks on my manual
Reply
Old Jul 31, 2020 | 08:01 PM
  #6  
Spiky's Avatar
Senior Member
Supporting Member

10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2015
Posts: 10,934
Likes: 2,457
From: Minneapolis
Default

I would have thought 2011 and 2013 are the same. It's in my manual, and service manual. Check it out.
Reply
Old Jul 31, 2020 | 08:42 PM
  #7  
A930rocket's Avatar
Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Feb 2009
Posts: 501
Likes: 128
From: Charleston, SC
Default

I don’t have an answer, but my driver door wouldn’t lock with the remote or the door switch. I checked the door jamb wires (common failure on the driver side rear door) and it looked ok. I bought a new door lock actuator, but out of the blue, everything is now working properly. I’ll wait until it stops working permanently and then replace it.
Reply
Old Aug 1, 2020 | 04:05 PM
  #8  
gDMJoe's Avatar
Senior Member
 
Joined: Nov 2010
Posts: 11,854
Likes: 2,559
From: Timbuk3, MI
Lightbulb

Osbornepe ...
HINT/TIP: Put your vehicle information (year, model, cab, trim, engine, wheelbase, _x4 drive, mileage, modifications, etc., etc.) in your signature -OR- provide it in your posting(s).

Also ...

(owner's manual) Don't have one -OR- would like a digital, searchable desktop document?
.
Owner's Manuals ««« -click-
.

» Select Your Year [ Choose One ]
» Select Your Make [ Choose One ]
» Select Your Model [ Choose One ]
»
.
Reply
Old Aug 1, 2020 | 09:33 PM
  #9  
Osbornepe's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2020
Posts: 4
Likes: 0
Default

You was correct it was fuse #20 i replaced it and all locks working great
Reply




All times are GMT -4. The time now is 06:54 AM.