utahjazzman

Have never once used the passcode on the door. How do I get the code? Also how do you turn interior lights?!

'11 fx4

kidastra

iTrader: (1)

its written on the bcm, need you to finish your light question

f150tamer

There should be the factory code Written in your manual and then just follow instructions to reset code to whatever you want

kobayashi maru

Not sure whether this works on a 2011 but it works on my 2013. You need two working keys. Stick the first one in and turn ignition switch to ON but do not turn the engine over. Turn it back to off and remove key. Insert second key and do the same thing. The code should display on your information screen.

festivaboy92

Oh man!!! You're missing out!! I use mine daily as half the time I am fumbling around checking all my pockets for My keys. Nice and handy to have but never thought would use it but it turns out I do.

09fx

I use my passcode all the time. You can lock the truck while its running by hitting the last two buttons on the right simultaneously, and you can open the rear doors by hitting the last number of your code an extra time. An example would be 54321-1

kobayashi maru

That never occurred to me! I'm gonna start doing that when I run into the store to buy a pack of smokes.

Swingmaster360

Hold the dimmer switch in the up position until lights turn on

tomasulo

I used that feature all the time too!!

WMT21184

The feature to unlock the rest of your doors is always the 1/2 button after entering your code, it has nothing to do with the code itself or what the last number is. If you have a Ford car with a trunk, hitting the 3/4 within 3 seconds will pop the trunk.