Open Door Detents
#1
2014 fx4 5.0
Thread Starter
Open Door Detents
When I open my door to get out of my truck, the first detent isn't open enough for me to squeeze out, and the second detent is so far open that if there's a car parked next to me my door will hit it. Although this doesn't seem like a big deal, I struggle to hold my door to prevent it from slamming into the vehicle parked next to me EVERY time I get out of my truck! It's so annoying!! Does anyone know of anything that can be done?
#2
FDT
When I open my door to get out of my truck, the first detent isn't open enough for me to squeeze out, and the second detent is so far open that if there's a car parked next to me my door will hit it. Although this doesn't seem like a big deal, I struggle to hold my door to prevent it from slamming into the vehicle parked next to me EVERY time I get out of my truck! It's so annoying!! Does anyone know of anything that can be done?
https://www.f150forum.com/f59/mp-doo...within-317040/
The following users liked this post:
KustomFX (05-20-2016)
#3
American member
Open Door Detents
Gotta give Northlight Labs a chance...They did invent them after all.
Sorry Lethal, nothing personal. Just giving the guy another option.
Sorry Lethal, nothing personal. Just giving the guy another option.
Last edited by Masi1926; 08-06-2019 at 01:51 PM.
The following 3 users liked this post by Masi1926:
#5
2nd Amendment Supporter!
Originally Posted by masitile
Gotta give Northlight Labs a chance...They did invent them after all.
Sorry Lethal, nothing personal. Just giving the guy another option.
Sorry Lethal, nothing personal. Just giving the guy another option.
Peter & Mary are good people!
There were many questions of a "buy back program" and it was declined by them.
My program simply gives another option to help someone out on here & as inexpensive as possible.
They are completely gone over, plus new & more grease than OEM in the mechanisms plus a brand new foam gasket is indeed included.
Some "dust caps" are indeed a non replaceable piece, and many of the MP Door Checks will have them.... But some will not. It's a poor design and will fall off eventually even if purchased new... Just a matter of time. Those dust caps only try to prevent dust going into mechanisms anyways.... And I still offer a lifetime warranty.
I highly recommend anyone who prefers to purchase brand new,to contact Peter & Northlite Labs.... Again, they're great people.
And anyone who doesn't mind to go reconditioned for 1/2 the cost (plus a lifetime warranty), ...to please contact me (aka: KustomFX) directly at: lethalweapon09@yahoo.com
(I also ship free - including the cores back to me)
And, again, I offer a lifetime warranty.
These are a great mod & shame on Ford for not doing this from the factory!!!
-Brett
Last edited by Lethal Weapon; 05-20-2016 at 10:00 AM.
The following users liked this post:
KustomFX (05-20-2016)
#6
Senior Member
I did Northlight ones and they have been great, I would have probably went the reconditioned route if he was doing them when I bought mine.
Both products will solve your issue OP.
Both products will solve your issue OP.
#7
BoostKing Tuning
One of the best things I've done for my truck is put the Northlight labs door detents in. Even my wife loves them.
__________________
www.BoostKingTuning.com
2022 F150 Tremor - Current - BoostKing Custom Tuned 440whp on 93. --- 2022 Expedition Stealth H.O. - JB4 Only --- 2018 Mustang Hellion Sleeper - 907 whp on E85
2022 F150 Tremor - Current - BoostKing Custom Tuned 440whp on 93. --- 2022 Expedition Stealth H.O. - JB4 Only --- 2018 Mustang Hellion Sleeper - 907 whp on E85