It is a putco grill insert with 10" led light bar.. Purchased at amazon, linky

 

Looks sharp!

 

Ouch on the 180$ for a grille though...

 

yes, but the lights are the bulk of the price. Did not want to pay 300+ for rigid, since they are more for drl than anything...

 

Looks clean nice install

 

How's the light output at night? Any pics?

 

No night pics, but they are pretty bright. I have driven with the heads off and they still light up pretty good. However, I did not use the wiring harness that came with it, just used existing wiring for my last setup. Not good, static on radio as soon as I turned them on. I am hoping that using the wiring harness with relay will alleviate that problem.

Will try to get a night pic without the heads on

 

Hello Ocwill, I'm wondering how you made out with this grill insert light? Is/did the radio noise remain? I've ordered one (bar style with 10" light and block heater hole) and I'm wondering if you're happy with yours or not. Also, is the beam direction adjustable, or is that not an issue because the beams broad enough?

 

Hi Ocwill1, how've you found this light bar? I've got one and before I install it, I've got a few questions hoping you can shed some light on (sorry for the pun!)

My truck seems to have a plastic frame (slight tunnel) surrounding this ecoboost opening. Did you remove that to fit the putco in its place? If not, it doesn't seem like it will fit...? Also, did the radio noise go away with the wiring harness install? Input appreciated, thanks!

 

did not have to remove anything. there are 2 slots in the bottom of the opening, the grill has 2 tabs that go in there. Then the top has 2 nuts/bolts that go through the holes at the top. You will see once you get in there. I have rewired and most of the static is gone. I am going to ground it to a different spot under hood and see if that gets rid of it. THe light is adjustable up and down. I had to adjust mine down so it did not blind oncoming vehicles...