lets see those 4" lift kit f150s!
The following users liked this post:
KingRanch4Life (06-13-2014)
#3
The following users liked this post:
Desert Dawg (06-10-2014)
The following users liked this post:
Desert Dawg (06-10-2014)
#5
Member
Thread Starter
Now what 4" lift are you guys running? And what wheel offset n tire size do u have?
I have fuel trophys with a 1 offset an 35x12.50x20 toyo at2 xtremes im gonna run on mine. I also rhink im gonna go with the rcx 4" lift mainly because price n I wont be doing any crazy off roading
I have fuel trophys with a 1 offset an 35x12.50x20 toyo at2 xtremes im gonna run on mine. I also rhink im gonna go with the rcx 4" lift mainly because price n I wont be doing any crazy off roading
The following users liked this post:
Desert Dawg (06-10-2014)
#7
Senior Member
Now what 4" lift are you guys running? And what wheel offset n tire size do u have?
I have fuel trophys with a 1 offset an 35x12.50x20 toyo at2 xtremes im gonna run on mine. I also rhink im gonna go with the rcx 4" lift mainly because price n I wont be doing any crazy off roading
I have fuel trophys with a 1 offset an 35x12.50x20 toyo at2 xtremes im gonna run on mine. I also rhink im gonna go with the rcx 4" lift mainly because price n I wont be doing any crazy off roading
On the white/grey FX4 I had, ran the Rancho 4-inch lift (which was actually closer to 5 inches) with 18x9 wheels with -12mm offset.
The RC lift will work fine if you don't plan on doing any moderate to extreme off-roading (their kits are cheaper for a reason). And the +1mm offset wheels will fit fine with the tires you selected although I suspect you'll still have some minor trimming with that tire width.
Trending Topics
#8
SkallyWag
I'm running the rancho 4" and an 18x9 -12 offset and love the stance and look Ive only got 33s for now because i lifted it when the tires were still pretty decent will be going to togo open country mt or trail grapplers soon after i get back to the states! man Tap Auto has the best prices around for the Rancho kit its a cool kit because depending on the front struts you order it is either 4/6" and its all welded subframe crossmember and is stout not much more expensive than the rcx.... just my 2 cents
#9
Member
Thread Starter
On the red Platnium above, I ran the Fabtech 4-inch lift with 20x9 wheels with a +18mm offset.
On the white/grey FX4 I had, ran the Rancho 4-inch lift (which was actually closer to 5 inches) with 18x9 wheels with -12mm offset.
The RC lift will work fine if you don't plan on doing any moderate to extreme off-roading (their kits are cheaper for a reason). And the +1mm offset wheels will fit fine with the tires you selected although I suspect you'll still have some minor trimming with that tire width.
On the white/grey FX4 I had, ran the Rancho 4-inch lift (which was actually closer to 5 inches) with 18x9 wheels with -12mm offset.
The RC lift will work fine if you don't plan on doing any moderate to extreme off-roading (their kits are cheaper for a reason). And the +1mm offset wheels will fit fine with the tires you selected although I suspect you'll still have some minor trimming with that tire width.
Yeah im not gonna go crazy offroading, just some mudding here n there. Trucks new to me so I can't see going crazy offroad an wrecking it at all