Adding a bull bar to my F-150 SCREW. Can anyone recommend some lights. Used mostly for hunting season.


which would you pick?

http://www.autoanything.com/lights/20A50718A1.aspx

maybe the 800 long range
http://www.autoanything.com/lights/65A3227A0A0.aspx

 

go with the 800 long range off-road set.

 

It depends on the look you want or what will fit on the bull bar. The 800 series are 8" and most of the others are only 6". I personally like the look of the smaller 6" slim lights. Plus if mostly used for hunting thats all you really need.

 

I had not considered the diameter. I want it to look nice with this and want 6 inch lights:

http://www.autoanything.com/grille-g...0A3194288.aspx

 

got the lights in and it has a green wire that goes to a relay. It's intended for the switch but the guy at kc told me I could tap into my factory switch for the fog lights to activate the relay. (pull out the **** and the fog lights come on)

Anyone used the fog lights to activate the KC lights? If so, which wire color from the switch or have a wiring schematic for an f-150 2010 screw?

Sure would save having to install another switch in the cab of the truck and I never use fog lights.

 

Delirious, do you have any pictures? I'm considering that bull bar for my truck. How has it held up so far?

 

Yeah, I really like it. I will post some pictures later this morning.

 

You have to cut holes in the plast shroud on the bottom of the bumper to accomodate this on an XLT. You also have to drill an additional hole in the bracket that attaches to the frame so that the bumper sits closer to the shroud. Pair up one bracket to another and use it to add the additional hole. (helps with spacing). Sorry, don't have pictures of that but I like it. I got the shallow KC highlights, extended beam.