Hey guys, I had my 2" leveling kit installed today, and it doesn't look like it lifted the front much at all. I wish I measured the rake in stock form...

Anyway, no pics now because it's a little dark. Currently I have 24" from the center of the hub to the fender in the front. And 24 3/4" in the rear.

Can someone point me towards a thread (I searched, and couldn't find anything) or post their stock truck measurements?

Thanks in advance!

 

Truck in SIG.

These are the best pictures I have of the truck. Not sure if the tiny fender flares affect the measurement or not.



These pics are of the stock truck

 

Mine was a 2" difference, can' remember actual numbers.

 

Did you get it aligned? That night change some.

 

Yeah it's all aligned.

 

My 1.5" AS level gave me a reverse rake and I had to add blocks to the rear!

 

agreed. this is a 2 inch and its clearly got a lean going on

 

Yup mine with a 2" is leaning back like this as well. Replacing the rear blocks to get the back end up some more.

My front measures 39.5" from ground to center of fender and the rear is 39".

adding another 1.25" to the rear for a 3/4" rake

 

Specs? 2wd" tire size etc.?

 

FX2 with stock 265/60/18"s. I recently added Bilstein 5100's to all 4 corners with the front 2 set on the 3rd indent/ring and measure from ground thru center cap to fender lip approx. 37" on the front 2 and slightly over 37.3 on the rear 2