Has anyone figured out how to shut off the backup sensor alarm?
#1
FEs Rule
Thread Starter
Join Date: Jul 2010
Location: Leavenworth Kansas
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone figured out how to shut off the backup sensor alarm?
Yes, I've looked in the manual. When I have to boat hooked up to the hitch it's constantly beeping when backing up to the boat ramp. It's hard to hear the boat driver over the alarm. I've looked and don't see any place I can temporarily disable it.
#2
ℳℴↁ℮ℜ@大☢®
when it starts going off, press the odometer reset button once
it's not a permanent disable though; it will come back on every time you put it in reverse; you just have to keep turning it off
it's not a permanent disable though; it will come back on every time you put it in reverse; you just have to keep turning it off
#4
Let the Fun Begin
There are two ways to disable it. you can disable it completely from the menu in the cluster...OR each time yu put it in reverse on the cluster is should give you the option to disable it for that one time you are currently backing up.
Trending Topics
#8
ℳℴↁ℮ℜ@大☢®
#9
Senior Member
It will reset to being ON every time you cycle the ignition ON again. Whether you turn it off by going through the menu or when shifting to reverse, it will still turn back on the next time you start the truck.
The following users liked this post:
GooseChaser (10-11-2016)
#10
Senior Member
If you have a trailer with brakes hooked up (7 pin connector) it automatically will be disabled when you shift into reverse with the trailer cable connected.