Highly doubt I'll be adding the rear vent. I thought about it for awhile. I never have anyone in the back, so to me it's not worth having. It's either just me or the girlfriend and I in the truck

 

Just a little update. The dash trim pieces came but was sent the ones I currently have!! I should have those pieces ( the correct ones ) mid next week hopefully. I'm going to disassemble the console and repaint all the silver( kinda beat up in some spots on the console ). Should I change the color or leave it silver? Was thinking white because of the white truck, but afraid it would look ricer-ish. Any ideas? Also ordered some vinyl as well to to the shifter piece, radio bezel and door pieces. Here is what I ordered

http://www.metrorestyling.com/3M-DI-...nocbubinga.htm

 

well life happens and I had to put the project on hold for a little while. Just recently got back to it. Tore all the silver pieces out of the truck and redid them in silver. Gonna look great when done I think. Still toying with looking for an oem light wood bezel and shifter assembly cover. So updates will be happening more

 

How different are the brackets from the old console compared to the flow through ?

 

Back bracket bolted right up. Still messing with the front as its a little different. May not even use it. It's a really tight flush fit to the dash

 

Good to hear found a complete console on eBay for 380 all the trim pieces included

 

If I had the black or grey interior I'd a gone with a raptor flow thru console. Has the uplifter switches etc to use instead of what I'm planning to do.

 

The raptor console was my first thought but finding a complete unit will be tough

 

The 380 you are willing to spend you could get a raptor console and buy what you need to replace what's missing. A lot I found were complete minus the switches.

 

The only one I've found is pretty bare no switches, trim missing and other small things. Just seems like rounding up all the extras would be a pain