DeeZee Tailgate Assist (aka EZ-Down) different versions
#91
Member
Just got done installing mine and it took all of 5 mins, DZ43200 Fits 04-13 driver side mounting.
The package and contents and a little video closing and opening tail gate. Love this thing, nothing binds at all, just smooth operation.
The package and contents and a little video closing and opening tail gate. Love this thing, nothing binds at all, just smooth operation.
Last edited by RLXXI; 08-02-2013 at 03:00 PM.
The following users liked this post:
ComQuest (08-03-2013)
#92
Senior Member
Just got done installing mine and it took all of 5 mins, DZ43200 Fits 04-13 driver side mounting.
The package and contents and a little video closing and opening tail gate. Love this thing, nothing binds at all, just smooth operation.
tail gate assist - YouTube
The package and contents and a little video closing and opening tail gate. Love this thing, nothing binds at all, just smooth operation.
tail gate assist - YouTube
#93
Member
#94
International man of Myst
For those of you who have problems with the nutsert, mine came loose 3 times, take a look at this thread. In fact, anyone doing the tailgate assist should automatically use this method to avoid the nutsert coming loose, you will never have the problem again.
http://www.fordraptorforum.com/f11/e...-solved-15369/
http://www.fordraptorforum.com/f11/e...-solved-15369/
#96
Member
The kit comes with loctight so when you screw the lower ball to the t Gate it stays stuck. However I do have access to a nutsert tool and assorted nutserts if I have any issues.
I cranked down pretty good on it, I kinda have the feel for when a bolt or nut will break, been wrenching for 30+ years.
.
I cranked down pretty good on it, I kinda have the feel for when a bolt or nut will break, been wrenching for 30+ years.
.
#97
Senior Member
I did nine at first and that felt secure but after a couple weeks mine can loose and was moving around and I got another and was told by the company 9-12 so I went 12 and at 12 turns it snugs right up to the point you know it's good. Loctite the crap out of it and smooth operation since.
The following users liked this post:
Funkdawg (08-02-2013)
#98
Senior Member
I'll be sure to add pics of it installed.
The following users liked this post:
RES4CUE (08-02-2013)
#100
Senior Member