When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2014 f150 SCREW with the 5.5 foot bed. I’ve been looking at a decked system for some time now, and found a used in my state less than 1/2 price of new. Only issue is that it is for the 15-20 f150 with the 5.5 bed. I looked up bed specs and they are VERY close, but what concerns me is wheel well location. I’m wondering if anyone has tried to put a newer decked system in a 09-14 5.5 bed. I don’t have access to one local to measure, and it’s about a 2 hour drive to go pick this one up if I want it.
Looking at bed dimensions for the 2014 vs. 2015, the 2015 is just a little bit wider, longer, and not quite as tall as the 2014. The 2015 overall length is the same but wheelbase is 1/2" longer. I doubt a tenth of an inch or a half inch would make that much of a difference on those dimensions.
I may be worth reaching out to Decked to see if they'll give you detailed dimensions on the 2015 unit to see if it will squeeze in there.
The drawer and corner pockets are common parts in the system, I do believe. The Deck top is the piece cut for specific applications. There is a lot of wheel tub clearance on my 2017 6.5 ft. bed.
I think there is enough room, just not sure 100%. Deck has been quite responsive to my e-mail and phone questions, right on top of the warranty replacement of a corner box that was cracked. KM
Decked System Compatibility
