Just as the title says. Who all is running 35s with a level kit?? I would like to see pics and specs.


Getting a 14 FX4 this week. I have a set of 35/12.50/20 Mastercraft MXTs I took off my superduty I was thinking about putting on the new one with a level kit and factory painted FX4 wheels.




Shane

 

I have a 10' FX4 with a 2" HBS level, 35x12.50x20 Cooper STT. Originally the only rub i had was on the UCA's when turning up steep driveways and offroading. So i purchsed some 1.5" Bora wheel spacers which took the rub off the UCA's but now it rubbed like crazy on my fender wells and front valence. I did all the trimming i could and still get some slight rub on driver side only. I'm working with Alex from F150lifts.com, deciding whether or not to go with a 2.5" spacer or their new 1" body lift. If i could go back i would defintaly go with 33's instead.

 

'06 lariat 4x4 2" level 35x12.5x20 with edge evo programmer

 

This is my 2012 fx4 f150. I had a 2.5" leveling kit on it which gave it a perfect leveled stance with the ranch hand replacement bumpers. I had 20x9 wheels at a 20+ offset with 35x12.50 nitto mud grapplers. Minor trimming but absolutely loved this truck.

 

Can't pass up an opportunity to post pics.
2" autospring level. 17x8.5 0 offset 35" Nitto Trail Grapplers. Trimmed plastic and zip tied liners back.

 

Here is mine. See sig for details

 

My Screw with a 2 inch level in the front and a Fat bob's add-a-leaf in the rear oem block removed.

 

My 14 with 2.5" level and 35" mastercraft

 

 

Any rubbing or trimming?