Ok, I had a foglight that wasn't working. I posted about using a different bulb. Well waiting for some warmer weather to get under there hasn't happened yet.

Anyways, I get to work and I notice the bulb is outta the housing. Just hanging there. I go to put it back in and notice one wire is broke. I took a pic and its kinda hard to see from the angle I'm at, I'm just curious if it can be taken out of the plug and respliced.

I'd also like the to know if anyone has the part number for what I need. Im pretty sure I need the female end. I really don't want to buy a whole harness, just the end, the clip part/aqua part that the wires go into...

 

This what your looking for ?
http://www.rockauto.com/en/catalog/f...onnector,12373

 

I would solder it back together.

 

Yea phill, that looks similar.

Ranger I don't have a soldering tool, I didn't get a good look at it to see where exactly the wire is broke. If I have to take it apart (if I can) to splice the wire in there or if I need to buy a new one and spice further back up the line.

Also by the looks of it, I need the male not the female

 

Does anyone have the Ford pat number? I went on tasca but they don't list it under electrical or in the fog section

 

The one Phil posted looks correct - WPT1080.

The plug may look male, but that is just the design of the plug. If you look inside the plug of the fog light, you'll see two prongs sticking out, and those are the male. The WPT1080 is female and has two openings on the end of it for the prongs in the lights!!

 

Ok, is that gonna be a motorcraft part number? I'm thinking about seeing if my dealer has them. I doubt it'll be cheaper but you never know.

 

If not the auto parts store should have that plug. It is pretty standard.

 

Yessir that is the motorcraft p/n

 

Thanks, I'm gonna swing by tomorrow between shifts.