20" LED Light Bar Mount HELP!!
#1
TTV6>V8
Thread Starter
20" LED Light Bar Mount HELP!!
Hi all,
I'm buying a 20" E- Series Rigid Industries LED Light Bar and have run into a problem...Its an Ecoboost
Where the am I going to mount this thing. I want to keep the truck looking mostly stock because I feel these trucks are almost perfect as they sit and adding a billet grille doesn't look as good as the PTM 6 bar grille.
I will add a picture to give reference of the truck.
Please give me your ideas on what to do. TIA
I'm buying a 20" E- Series Rigid Industries LED Light Bar and have run into a problem...Its an Ecoboost
Where the am I going to mount this thing. I want to keep the truck looking mostly stock because I feel these trucks are almost perfect as they sit and adding a billet grille doesn't look as good as the PTM 6 bar grille.
I will add a picture to give reference of the truck.
Please give me your ideas on what to do. TIA
Last edited by Logan24; 10-15-2012 at 09:07 PM.
#4
Senior Member
A member on here, forgot who, mounted it in the lower bar in the grille. He cut out a section of the lower bar and mounted the lights flush. I for one thought it looked sleek.
#6
TTV6>V8
Thread Starter
Haha, I wouldn't mind hiding it completely behind the OEM grille but I don't think there is enough room between the 6 bars...
#7
Member
Bump
Trending Topics
#8
TTV6>V8
Thread Starter
So I ended up going with a 30" SR. Mounted it behind the grill and I couldn't be happier.
Here's a few pics of it as it sits now. I might change it once it gets warmer out.
I get about 85-90 percent of the beam, I've seen guys mounting them into the actual grille so I may try that in may or June.
Here's a few pics of it as it sits now. I might change it once it gets warmer out.
I get about 85-90 percent of the beam, I've seen guys mounting them into the actual grille so I may try that in may or June.
The following users liked this post:
2014 F150 Lariat (02-27-2017)
#9
So I ended up going with a 30" SR. Mounted it behind the grill and I couldn't be happier.
Here's a few pics of it as it sits now. I might change it once it gets warmer out.
I get about 85-90 percent of the beam, I've seen guys mounting them into the actual grille so I may try that in may or June.
Here's a few pics of it as it sits now. I might change it once it gets warmer out.
I get about 85-90 percent of the beam, I've seen guys mounting them into the actual grille so I may try that in may or June.
#10
TTV6>V8
Thread Starter
Did you run it during hot weather yet?
I don't want to put anything in the IC hole just because I know ford would blame that if I end up having problems.
The following users liked this post:
Brett2013fx4 (09-26-2013)