post pics of your PRERUNNER
06-08-2013, 04:13 PM
#34
mine is not done yet but this is how she looks right now
The following users liked this post:
patclarke (06-08-2013)
The following users liked this post:
patclarke (06-09-2013)
06-09-2013, 05:13 AM
#38
She is at Brenthel right now getting her suspension done. Should be done by the end of the month.
Front
F14R04 Kit Front
F14R0408 04-08 4WD Ford F150
Long Travel System, Includes
-Boxed Upper Control Arms
-Boxed Lower Control Arms
-Custom Fabricated Upright (Eliminating all ball joints)
-Hardware Kit: Heims, Monoballs, Misalignments, Bushings, Crush Sleeves.
-Extended Brake Lines
-Stainless steering adapter with tie rod
-Custom axles
-930 Race CV joints
-Custom CV adapter
- Sheetmetal Custom boxed shock mount
Install - Kit Removal of old parts, Cut out stock coil bucket, weld in shock bucket, install
limit straps, weld on bump stop mounts, relocate battery, windshield wiper
box, cooler overflow. Weld washers onto lower pivots. Cycle suspension
throughout travel for clearance. Install brakelines, bleed brakes, install new
tie rods or extensions.
KING - 2.5 Coilover King 2.5" Coilover 2
KING - 2.5 Bypass King 2.5" Bypass 2 tube. 10" stroke piggyback 2
KING - 2.5" Bumpst... KING 2.5" Bumpstops with cans 2
Engine Cage Removable Engine Cage
0.00 0.00
0.00 0.00
04-08 4WD F150 Race kit
F1SU-04 - Kit
Rear
F1SU0408 04-08 Ford F150 Spring under kit. Includes Brenthel Industries shackles,
perch mounts, lower spring plates, Shock Mount that needs to be welded
underneath bed. Custom Deaver leaf springs for this kit.
Install - Rear SU Kit Take apart all leaf springs, cycle suspension to properly to Mount Shocks to
rear axle, cycle for proper driveshaft lengths, weld kit, install brakelines &
bleed system
KING - 3.0 Pre - By... KING 3.0 2- tube bypass 2
KING - 2.5" Bumpst... KING 2.5" Bumpstops with cans 2
Drivelines - Driveshaft Custom Driveshaft with U-Joints
Custom Fab - Bumps... F150 Rear Bumpstops Installed with gussets for frame.
The best part is 18" of travel in the rear with out a bed cage.
Front
F14R04 Kit Front
F14R0408 04-08 4WD Ford F150
Long Travel System, Includes
-Boxed Upper Control Arms
-Boxed Lower Control Arms
-Custom Fabricated Upright (Eliminating all ball joints)
-Hardware Kit: Heims, Monoballs, Misalignments, Bushings, Crush Sleeves.
-Extended Brake Lines
-Stainless steering adapter with tie rod
-Custom axles
-930 Race CV joints
-Custom CV adapter
- Sheetmetal Custom boxed shock mount
Install - Kit Removal of old parts, Cut out stock coil bucket, weld in shock bucket, install
limit straps, weld on bump stop mounts, relocate battery, windshield wiper
box, cooler overflow. Weld washers onto lower pivots. Cycle suspension
throughout travel for clearance. Install brakelines, bleed brakes, install new
tie rods or extensions.
KING - 2.5 Coilover King 2.5" Coilover 2
KING - 2.5 Bypass King 2.5" Bypass 2 tube. 10" stroke piggyback 2
KING - 2.5" Bumpst... KING 2.5" Bumpstops with cans 2
Engine Cage Removable Engine Cage
0.00 0.00
0.00 0.00
04-08 4WD F150 Race kit
F1SU-04 - Kit
Rear
F1SU0408 04-08 Ford F150 Spring under kit. Includes Brenthel Industries shackles,
perch mounts, lower spring plates, Shock Mount that needs to be welded
underneath bed. Custom Deaver leaf springs for this kit.
Install - Rear SU Kit Take apart all leaf springs, cycle suspension to properly to Mount Shocks to
rear axle, cycle for proper driveshaft lengths, weld kit, install brakelines &
bleed system
KING - 3.0 Pre - By... KING 3.0 2- tube bypass 2
KING - 2.5" Bumpst... KING 2.5" Bumpstops with cans 2
Drivelines - Driveshaft Custom Driveshaft with U-Joints
Custom Fab - Bumps... F150 Rear Bumpstops Installed with gussets for frame.
The best part is 18" of travel in the rear with out a bed cage.
Last edited by patclarke; 06-09-2013 at 05:17 AM.
06-09-2013, 08:23 AM
#39
Senior Member
She is at Brenthel right now getting her suspension done. Should be done by the end of the month.
Front
F14R04 Kit Front
F14R0408 04-08 4WD Ford F150
Long Travel System, Includes
-Boxed Upper Control Arms
-Boxed Lower Control Arms
-Custom Fabricated Upright (Eliminating all ball joints)
-Hardware Kit: Heims, Monoballs, Misalignments, Bushings, Crush Sleeves.
-Extended Brake Lines
-Stainless steering adapter with tie rod
-Custom axles
-930 Race CV joints
-Custom CV adapter
- Sheetmetal Custom boxed shock mount
Install - Kit Removal of old parts, Cut out stock coil bucket, weld in shock bucket, install
limit straps, weld on bump stop mounts, relocate battery, windshield wiper
box, cooler overflow. Weld washers onto lower pivots. Cycle suspension
throughout travel for clearance. Install brakelines, bleed brakes, install new
tie rods or extensions.
KING - 2.5 Coilover King 2.5" Coilover 2
KING - 2.5 Bypass King 2.5" Bypass 2 tube. 10" stroke piggyback 2
KING - 2.5" Bumpst... KING 2.5" Bumpstops with cans 2
Engine Cage Removable Engine Cage
0.00 0.00
0.00 0.00
04-08 4WD F150 Race kit
F1SU-04 - Kit
Rear
F1SU0408 04-08 Ford F150 Spring under kit. Includes Brenthel Industries shackles,
perch mounts, lower spring plates, Shock Mount that needs to be welded
underneath bed. Custom Deaver leaf springs for this kit.
Install - Rear SU Kit Take apart all leaf springs, cycle suspension to properly to Mount Shocks to
rear axle, cycle for proper driveshaft lengths, weld kit, install brakelines &
bleed system
KING - 3.0 Pre - By... KING 3.0 2- tube bypass 2
KING - 2.5" Bumpst... KING 2.5" Bumpstops with cans 2
Drivelines - Driveshaft Custom Driveshaft with U-Joints
Custom Fab - Bumps... F150 Rear Bumpstops Installed with gussets for frame.
The best part is 18" of travel in the rear with out a bed cage.
06-09-2013, 08:34 AM
#40
LOL its all good. It does look dumb incomplete. The new suspension pushes out the stance 4.5" on each side plus with the off set of my new wheels and bigger tires I would be almost 10"s wider! then just need a skid plate to clean up the look. 
Last edited by patclarke; 06-09-2013 at 08:37 AM.
The following users liked this post:
Total Automotive Performance (07-23-2013)