2019 F150 4x4 SCREW 2.7EB
Will have Bilstein 5100 on all 4 corners, hoping to have set at 1.75" with enough room for the new setup and not maxed out 2.10" (dealer will be installing Bilstein's and new wheels/tires at same time)

Here's what I'm looking at (below pic), had debated staying with the 18" wheels to keep setup as "close to factory" as possible, but after a bit of research (and since i rarely do any offroading) i figured the 20" would make the most sense for on-road driving and aesthetics, this is also the logic behind the tire choice. The Falkens are only about ~7lbs heavier than the stock Michelins I have now so hoping it shouldn't have too much of a difference on MPG, etc.

 

That'll probably be pretty good. I was considering those tires, but just had some Yokohama Geolandar AT G015 installed on Monday. The fallen have lots of decent reviews, but I wanted a known great tire, and everything about the G015 gets top marks, quiet, wear, all season traction, and handling. The other three I considered was the Cooper AT3 4S but they haven't been out long enough for a lot of feedback on them longer term.