20x10 Help?
Thread Starter
Member
Joined: Jul 2014
Posts: 81
Likes: 2
From: Louisiana
20x10 Help?
So after sifting throughout this site, all over, I decided I liked the look of 20x10 Mavericks versus the 20x9's. I then found this https://www.customwheeloffset.com/wh...it-custom-rims
He says major trimming, what kind of trimming do you guys think it was? Metal or plastic or both? Would I be better of running 20x10 -12 Offset, Ill be running 295/65/20 Nitto Trail Grapps or Toyo OC M/T.
Thanks guys
He says major trimming, what kind of trimming do you guys think it was? Metal or plastic or both? Would I be better of running 20x10 -12 Offset, Ill be running 295/65/20 Nitto Trail Grapps or Toyo OC M/T.
What suspension are you running? I'll be running 20x10 method standards in -12 this week, on 295/60s on a 3 inch level. (I have a 2wd, based off your screen name it would be equivalent to a 4wd with a 2 inch I believe) with hopefully no trimming. With that said, I already trimmed plastic to run 20x9 Mavericks in 0 offset, and after trimming I had tons of room.
Thread Starter
Member
Joined: Jul 2014
Posts: 81
Likes: 2
From: Louisiana
2.5 level
What suspension are you running? I'll be running 20x10 method standards in -12 this week, on 295/60s on a 3 inch level. (I have a 2wd, based off your screen name it would be equivalent to a 4wd with a 2 inch I believe) with hopefully no trimming. With that said, I already trimmed plastic to run 20x9 Mavericks in 0 offset, and after trimming I had tons of room.
Junior Member
Joined: Jan 2015
Posts: 7
Likes: 0
let me know what you end up going with. looking for something similar to this. I want a 20x10 with -12 offset. rough country 2.5 level kit with 1 inch in rear on me 2014 f150. there telling me meaning Rough country it will not fit and will have major rubbing with a 20x10 inch rim. this makes me worried.