okay perfect. I am looking at building a box that is 3inch deep that would fit the shallow mount Memphis 10''.it only has a 2.5 inch mounting depth. It should fit behind the driver side back seat if my thoughts are correct. :)

What I use to have in my 96 Ranger!
http://dingo.care2.com/pictures/c2c/.../9/8958347.jpg
http://dingo.care2.com/pictures/c2c/.../2/9292624.jpg

Prior system.
http://dingo.care2.com/pictures/c2c/...6/8/686910.jpg
http://dingo.care2.com/pictures/c2c/...6/8/686916.jpg

These 6.5" Audiobahn AMD60Q midbasses are in my son's Protege now, front doors & rear deck.
http://dingo.care2.com/pictures/c2c/...6/8/686919.jpg

Here is the Kicker 08S15L74 from the Ranger today! I finished the box a couple of weeks ago.
http://dingo.care2.com/pictures/c2c/...QWT%20Side.jpg
http://dingo.care2.com/pictures/c2c/...WT%20Front.jpg
http://dingo.care2.com/pictures/c2c/...Sealed%200.jpg
http://dingo.care2.com/pictures/c2c/...%20HTS%201.jpg

Raised 1" & moved forward 3". Yes! What other pics do you want to see?

Just the back ones.

Here are all the pics to the install.

http://www.care2.com/c2c/photos/view...uperCrew_5_4L/

https://www.f150forum.com/f4/system-...-heavy-138785/

New one I started adding tonight

Just some more pics of the whole seat raised and a few close ups of the brackets installed. how did you measure how far apart your holes are for the bolts? and what are the distances for the holes?

thanks man this will help me out a lot!!

3" on the big gaps and 1.5" on the little gaps from the center of each hole. The brackets are 7.5" long.

thanks dude!!

1-8" apline type R sub w/ 600.1 rockford fosgate.

http://i67.photobucket.com/albums/h2...after/sub2.jpg
http://i67.photobucket.com/albums/h2...after/sub3.jpg
http://i67.photobucket.com/albums/h2...after/sub4.jpg