No sound
03-20-2012, 12:25 PM
#13
Senior Member
I was thinking the same thing, but if his amp if turning on then it must be connected. it must be sometbing to do with the rcas or speaker wire if everything you said above is true. it could possible be some settings on your amp, maybe everything is turned all the way down
03-20-2012, 04:40 PM
#14
1st make sure u have the remote turn on hooked to the right wire on radio then make sure amp cuts off when radio does. then make sure u have amp gain turned up. then if doesnt work take out the rca out of head unit and touch your finger on it and should make a sound when u touch it ... then if dont u might have bad rca or the output on head unit is bad
03-20-2012, 06:54 PM
#15
Senior Member
Thread Starter
1st make sure u have the remote turn on hooked to the right wire on radio then make sure amp cuts off when radio does. then make sure u have amp gain turned up. then if doesnt work take out the rca out of head unit and touch your finger on it and should make a sound when u touch it ... then if dont u might have bad rca or the output on head unit is bad
03-28-2012, 09:26 AM
#18
Originally Posted by 04whitefx4
No raif281 I have not yet to be honest I put my oem deck and the factory 8inch sun back in for now till I can get time to take it over to a stero shop
03-29-2012, 10:27 AM
#19
Senior Member
Thread Starter
But here is the thing I don't under stand I put my alpine screen back in and hooked up the own sub and it will work but when I hook up my after market amp and subs nothing so I'm just gone to leave the oem 8" sub hooked up to my alpine deck.