Need help
09-25-2018, 08:44 PM
#21
Originally Posted by artsr2002
Have any of you had issue running two runs of speed wire along the driver side? Is there plenty of room in there? My speedwire is about 1/2 inch due to the thick outer insulation. Thanks.
09-26-2018, 04:19 PM
#22
Senior Member
I was initially going to run Speedwire from the Parrot harness to the back wall and mount my amps/crossovers there and then run the amped signal back to the parrot harness using another run of speedwire. My 4ch amp is small enough I'm pretty sure I can fit it behind/under the dash close enough I don't need to run speedwire to the back. It has RCA output that I will use to run signal to my sub amp that will be in the back, either on the wall or attached to my under seat box.
I was just wondering how much wiggle room there was for making 2 runs of speedwire. Now I will just need to run one pair of RCAs along the drivers side as the 4ga power wire for my amp sub will run down the passenger side.
I was just wondering how much wiggle room there was for making 2 runs of speedwire. Now I will just need to run one pair of RCAs along the drivers side as the 4ga power wire for my amp sub will run down the passenger side.