My Xlt Install
#31
One Clean Machine
iTrader: (5)
Nice SportMode, please install same in mine... 😊
#32
Rather be on the lake
Bring this thread back to life. Wanting to install the same Amp along with a db691 and db651s in my xlt. Can you share what the settings need to be I the pioneer Amp? Also did you use the same speaker rings In the door or purchase new?
#33
Senior Member
Thread Starter
4ch
front filter off
rear filter hp
Metra speaker adapters
Front speaker 82-5606
Rear speaker 82-5605
Wire harness 72-5602
#34
Rather be on the lake
Thanks! Hooked mine up this morning but I am not getting power to the Amp. I do not need to do anything with the blue and white remote wire correct?
#35
Senior Member
Thread Starter
The amp will sense a signal and turn on without the remote wire, but you could hook it up to the power wire for testing. And if it turns on then you can run a wire to fuse #23 at the passenger side fuse block and use a fuse tap for remote power.
If the amp doesn't turn on testing the remote wire then make sure you have power on the yellow wire and check the connection.
If the amp doesn't turn on testing the remote wire then make sure you have power on the yellow wire and check the connection.
#36
I installed that sub box with the pioneer speaker in my truck yesterday.. the bracket that you had issues with wasn't on the back of my seat in my 2017 so I didn't have that problem. I have the Screw. Sounds AWESOME! Thanks for the tip!
The following users liked this post:
Sport Mode (08-06-2017)