Missing 6v Trigger output from ACM
Thread Starter
Junior Member
Joined: Jun 2024
Posts: 2
Likes: 0
Missing 6v Trigger output from ACM to Kicker subwoofer
Hello,
I have recently installed the VKL3Z-18808-A F-150 OEM Ford Kicker Audio 8" Sub Woofer Speaker & 100w Amp Kit
in my 2020 Ford F150.
On the 26pin connector on the back of the ACM i installed Rem trigger/Sub+/Sub- on pin 4, 17 & 18
Ground and 12v on amp is verified ok.
Connected forscan and did the changes needed.
ACM Modifed:
727-01-01-9808-1A02-13FF
727-01-02-0A88-FF00-00C2
The problem:
I do not get the 6v trigger signal from the ACM to the subwoofer, so the amp will not turn on.
Do any of you have the knowledge to help me with this issue.
First post ever on the Forum, first time using forscan, and first time owning a Ford.
Attached is the manual for the VKL3Z-18808-A
Thanks in advance.
I have recently installed the VKL3Z-18808-A F-150 OEM Ford Kicker Audio 8" Sub Woofer Speaker & 100w Amp Kit
in my 2020 Ford F150.
On the 26pin connector on the back of the ACM i installed Rem trigger/Sub+/Sub- on pin 4, 17 & 18
Ground and 12v on amp is verified ok.
Connected forscan and did the changes needed.
ACM Modifed:
727-01-01-9808-1A02-13FF
727-01-02-0A88-FF00-00C2
The problem:
I do not get the 6v trigger signal from the ACM to the subwoofer, so the amp will not turn on.
Do any of you have the knowledge to help me with this issue.
First post ever on the Forum, first time using forscan, and first time owning a Ford.
Attached is the manual for the VKL3Z-18808-A
Thanks in advance.
Last edited by F150Aleks; Jun 4, 2024 at 02:18 AM.
