Installing LC2i - 2017 XLT SCREW
01-06-2018, 09:25 PM
#1
Junior Member
Thread Starter
Join Date: May 2017
Location: Oceanside, CA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Installing LC2i - 2017 XLT SCREW
Forgive me if the answer is somewhere on this site as I am sure it is. I was not able to locate it through search. I’m installing my system tomorrow in my new 2017 XLT Screw. It has the 302a package with the 8” display and nav (non-Sony). Here is what I got.
1) Two 10JLW1 3-4 in a downfire box
2) Alpine M500
3) AudioControl LC2i
4) AudioControl Bass ****
5) Kicker PK4 4 gauge kit
I installed my system in my previous truck (2016 XLT). I didn’t have the LC2 and I used a cheap Kicker LOC. I tapped it into the rear door speakers through the passenger side B-Pillar. I have been told that when installing the LC2, it is better to wire it to the front door speakers. I’m not exactly sure the best way to do that and would love it if you guys can share a How-To or something. Ideally I do NOT want to cut any OEM wires. I plan to use Scotch Locks or something. What’s the best and easiest way to wire my LC2? I’ll be doing this in some very cold weather with 2 ft of snow on the ground so I would love to get it done quick. Thanks!
1) Two 10JLW1 3-4 in a downfire box
2) Alpine M500
3) AudioControl LC2i
4) AudioControl Bass ****
5) Kicker PK4 4 gauge kit
I installed my system in my previous truck (2016 XLT). I didn’t have the LC2 and I used a cheap Kicker LOC. I tapped it into the rear door speakers through the passenger side B-Pillar. I have been told that when installing the LC2, it is better to wire it to the front door speakers. I’m not exactly sure the best way to do that and would love it if you guys can share a How-To or something. Ideally I do NOT want to cut any OEM wires. I plan to use Scotch Locks or something. What’s the best and easiest way to wire my LC2? I’ll be doing this in some very cold weather with 2 ft of snow on the ground so I would love to get it done quick. Thanks!
