Fox Box Subwoofer Enclosure Review for 2015+ F150 SuperCrews
#22
Senior Member
#25
Senior Member
#27
Senior Member
i wasn't going to ask because its not that i'm an advocate for 1 sub vs 2 .. either one is fine.. 3 subs .. 4 .. just depends on the sub and what you're trying to achieve .. my comment was more because my buddy has 4 10's in his titan and my 1 sub (different brand) is louder with better sound quality than his.. but i suggested the 1 sub before he bought his 4 but he just couldn't process that the 1 sub would have been louder than the 4
#29
#30
Ask and thou shall receive!
The fitment under the backseat is pretty good. It only extends out about an inch as compared to the seal box I made. The seat goes all the way down and you can sit on the seat and not compress the box. The subwoofer is recessed above the floor with plenty of clearance from the floor so nothing is blocked. I had to re-tune my DSP since the level I used for the seal box was much higher than what this needs. I set my subsonic filter at 31 Hz and the LPF at 80 Hz. After the tweeks man-o-man does this thing SLAM!
My only issue is the diameter of the sub cutout in the box. There was not a whole heck of a lot of meat around opening to use the threaded insert nuts I got to mount the sub. Had to go slow and make sure it was mounted evenly.
Overall, if you want a ported box that will not take up the entire back floor...this is the way to go. The JL 10W3v3 sounds awesome in it.
The fitment under the backseat is pretty good. It only extends out about an inch as compared to the seal box I made. The seat goes all the way down and you can sit on the seat and not compress the box. The subwoofer is recessed above the floor with plenty of clearance from the floor so nothing is blocked. I had to re-tune my DSP since the level I used for the seal box was much higher than what this needs. I set my subsonic filter at 31 Hz and the LPF at 80 Hz. After the tweeks man-o-man does this thing SLAM!
My only issue is the diameter of the sub cutout in the box. There was not a whole heck of a lot of meat around opening to use the threaded insert nuts I got to mount the sub. Had to go slow and make sure it was mounted evenly.
Overall, if you want a ported box that will not take up the entire back floor...this is the way to go. The JL 10W3v3 sounds awesome in it.