Car Audio
#31
Senior Member
I lied I used a 3/4 wood boring drill bit a first but it actually took a 7/8 wood boring drill bit. unless some are 3/4 an some are 7/8. you will need a small saw blade to cut a little knotch on the side of the whole. it's to keep the switch from turning, you'll see what im talking about when you get the switch.
alright sounds good, im not looking to do it NOW but i somethin i need to look into
#32
Senior Member
Thread Starter
Originally Posted by blue thunder06
alright sounds good, im not looking to do it NOW but i somethin i need to look into