So this is incorrect then?

 

The part number I ended up ordering is QCFOR-11. I will check it out once it arrives. By any chance do you have a larger image of the one you posted, I can't quite make out the connectors.

 

Here is thread where it came from. I think there is a youtube video with it too, but I do not know what it was called.

https://www.f150forum.com/f118/so-yo...313994/index2/

 

Looks close, not 100%, but it might just work.

 

I was told by a vendor that the FOR-11CK will become available again next week. Mine should be in my hands Friday the 7th. The link below is where I ordered mine when they were still taking orders. The link should work again when he gets them in stock

 

Infotainment makes one, it's in a kit with the OBD Genie thing that removes the factory processing and gives you pre-amp output. Only problem is it's about $220, not sure if they'd sell the wiring harness separately.

 

Have a link for this?

 

https://www.infotainment.com/collections/installation-components/products/ford-aftermarket-amplifier-audio-harness

 

The harness arrived today, I can confirm that it works. I pulled out the head unit, plugged in the harness and confirmed it works. To use it as is, you need to connect the 2 smaller connectors to each other to complete the circuit for the speakers. There is even a power and ground out pigtail to tap into for another device such as a LOC or DSP.

The only gotcha is that the colors are different than the Ford speaker colors.

 

Good to know! Thanks