2015+ SuperCAB sub boxes???
#1
Senior Member
Thread Starter
2015+ SuperCAB sub boxes???
What sub boxes are out there for the 2015+ Supercabs? I've been looking and can't seem to find anything other than supercrew boxes.
I'd prefer something behind the seats, but under-seat is fine too as long as it doesn't stick out past the front edge of the seats.
I'd prefer something behind the seats, but under-seat is fine too as long as it doesn't stick out past the front edge of the seats.
#3
Senior Member
Thread Starter
#4
Official HTT Greeter
https://www.pioneerelectronics.com/P...unt/TS-SWX3002
This is the 12" I used, I ended up cutting the sides and angling the front mounting face in a little to make it more narrow. Sadly I only had basic hand tools and a living room coffee table to work on, so it came out a little rough around the edges. But it works and I was able to reseal it with silicone and screws. It needs recarpeted to cover the screws, but it works and my seats stay up.
Details here:
https://www.f150forum.com/f30/2016-f...ub-amp-364153/
Post #109 has pictures
#5
Senior Member
Thread Starter
I got ambitious and tried to squeeze a shallow 12" behind the seat. It fit, but did require some modification. I believe the 10" version fits fine.
https://www.pioneerelectronics.com/P...unt/TS-SWX3002
This is the 12" I used, I ended up cutting the sides and angling the front mounting face in a little to make it more narrow. Sadly I only had basic hand tools and a living room coffee table to work on, so it came out a little rough around the edges. But it works and I was able to reseal it with silicone and screws. It needs recarpeted to cover the screws, but it works and my seats stay up.
Details here:
https://www.f150forum.com/f30/2016-f...ub-amp-364153/
Post #109 has pictures
https://www.pioneerelectronics.com/P...unt/TS-SWX3002
This is the 12" I used, I ended up cutting the sides and angling the front mounting face in a little to make it more narrow. Sadly I only had basic hand tools and a living room coffee table to work on, so it came out a little rough around the edges. But it works and I was able to reseal it with silicone and screws. It needs recarpeted to cover the screws, but it works and my seats stay up.
Details here:
https://www.f150forum.com/f30/2016-f...ub-amp-364153/
Post #109 has pictures
#6
not sure where in ohio you are but i have a brand new under seat box for a pair of 8s for my '13 scab that was never used sitting in my office in westlake. i'd be happy to let you test fit it and make a great deal if you want to purchase. depending on the depth of the sub you want the openings could be enlarged for a 10 or 12 but the airspace in each chamber is only 0.4cf.
#8
Senior Member
Thread Starter
not sure where in ohio you are but i have a brand new under seat box for a pair of 8s for my '13 scab that was never used sitting in my office in westlake. i'd be happy to let you test fit it and make a great deal if you want to purchase. depending on the depth of the sub you want the openings could be enlarged for a 10 or 12 but the airspace in each chamber is only 0.4cf.
#9
I would actually be very interested in this. I figured if I couldn't work something decent in behind the seat, I was going to build a box for a pair or 8s. I'm near Toledo. Could you take measurements, and maybe snap a couple pics? By my measure, I can roughly 55" wide, 9.25" deep, 6" high at back, and 8.5" high at the front.
The following users liked this post:
tenx82 (08-09-2018)
The following users liked this post:
tenx82 (08-10-2018)